Data Monitor
WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitored item [Unit] |
Description |
|---|---|
| VHCL SPEED SE [km/h] |
Vehicle speed signal received from ABS actuator and electric unit (control unit) via CAN communication. |
| YAW RATE [deg/s] |
Yaw rate signal received from ABS actuator and electric unit (control unit) via CAN communication. |
| PWR SUP MONI [V] |
Indicates IGN voltage input by Distance sensor. |
| DISTANCE [m] |
Indicates the distance from the vehicle ahead. |
| RELATIVE SPD [m/s] |
Indicates the relative speed of the vehicle ahead. |
| LASER OFFSET [m] |
NOTE:
The item is indicated, but not used. |
| LASER HEIGHT [m] |
NOTE:
The item is indicated, but not used. |
| STEERING ANGLE [deg] |
The steering angle is displayed. |
| STRG ANGLE SPEED [deg/s] |
The steering angle speed is displayed. |
| L/R ADJUST [deg] |
Indicates a horizontal correction value of the radar. |
| U/D ADJUST [deg] |
Indicates a vertical correction value of the radar. |
| FCW SYSTEM ON [On/Off] |
NOTE:
The item is indicated, but not used. |
| FCW SELECT [On/Off] |
NOTE:
The item is indicated, but not used. |
| FEB SW [On/Off] |
Indicates [On/Off] status of FEB system |
| FEB SELECT [On/Off] |
Indicates an ON/OFF state of the FEB system. |
| BRAKE SW [On/Off] |
Indicates [On/Off] status as judged from brake pedal position switch signal (BCM transmits brake pedal position switch signal through CAN communication) |
| IDLE SW [On/Off] |
Indicates [On/Off] status of idle switch read from distance sensor through CAN communication (ECM transmits On/Off status through CAN communication) |
| THRTL SENSOR [On/Off] |
NOTE:
The item is indicated, but not used. |
| VEHICLE AHEAD DETECT [On/Off] |
Indicates [On/Off] status of vehicle ahead detection indicator output |
| STATIC OBSTACLE DETECT [On/Off] |
Indicates [On/Off] status of static obstacle detection |
| BUZZER O/P [On/Off] |
Indicates [On/Off] status of warning chime output |
| FUNC ITEM (FCW) [Without FCW/With FCW] |
NOTE:
The item is indicated, but not used. |
| FUNC ITEM (FEB) | Indicates systems which can be set to ON/OFF by selecting FEB. |
| PRESS ORDER | Indicates status as judged from brake fluid pressure signal [ABS actuator and electric unit (control unit) transmits brake fluid pressure signal through CAN communication]. |
| Shift position | Indicates shift position read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication). |
| Turn signal |
NOTE:
The item is indicated, but not used. |
| ADAS MALF | Indicates [On/Off] status of ADAS malfunction |
| MILEAGE | Indicates [On/Off] status of ADAS malfunction |