LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Quest SL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner >> Basic Inspection >> System Initialization >> Work Procedure

Work Procedure

  1. STEP 1 

    There are two initialization methods.

    Which method do you use? 

    With door switch: GO TO 2.

    With vehicle speed: GO TO  3.

  2. STEP 2-A (WITH DOOR SWITCH) 
    1. Turn ignition switch from ACC to OFF position.
    2. Front door switch (driver side) is ON (open) → OFF (close) → ON (open).

      : END

  3. STEP 2-B (WITH VEHICLE SPEED) 

    Drive the vehicle at more than 25 km/h (16 MPH).

    : END

scientia non olet · About LEMON Manuals