LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> NV3500 HD SL >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Unit Removal And Installation >> EVAP Control System Pressure Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Disconnect the harness connector (A) from the EVAP control system pressure sensor.
    Fig 1: Identifying Harness Connector From EVAP Control System Pressure Sensor
    G08162298Courtesy of NISSAN NORTH AMERICA, INC.
  2. Release the locking tabs (A) and remove the EVAP control system pressure sensor (1) and O-ring (2).
    CAUTION: Do not reuse O-ring.
    Fig 2: Identifying Control System Pressure Sensor, Locking Tabs And O-Ring
    G08435976Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals