Component Function Check
WARNING: This page is about a different car, the 2014 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK S-MODE SWITCH FUNCTION-I NOTE: If DTC UXXXX are displayed, first perform the trouble diagnosis for DTC UXXXX.
- Turn ignition switch ON.
- Select "M/T SYNCHRO SW" in "DATA MONITOR" mode with CONSULT.
- Check "M/T SYNCHRO SW" indication under the following conditions.
Monitor item Condition Indication M/T SYNCHRO SW S-MODE switch Pressed ON Released OFF Is the inspection result normal?
YES: GO TO 2.
NO: Go to "DIAGNOSIS PROCEDURE ".
- CHECK S-MODE SWITCH FUNCTION-II
Check the S-MODE indicator under the following condition.
Condition S-MODE indicator S-MODE switch Press (less than 1 second) Illuminated Press (1 second or more) Not illuminated Is the inspection result normal?
YES: INSPECTION END
NO: Go to "DIAGNOSIS PROCEDURE ".