Physical Values

WARNING: This page is about a different variant/trim than selected.

Terminal No. (Wire color)

Description

Condition

Value (Approx.)

Signal name

Input/Output

1 (GR)

Ground

Battery power supply (AWD control module)

Input

Always

11 - 13 V

3 (LG)

Ground

Ignition power supply

Input

Ignition switch: ON

11 - 13 V

Ignition switch: OFF

0 V

4 (L)

CAN-H

Input/Output

5 (P)

CAN-L

Input/Output

9 (W)

Ground

AWD mode switch (Except 2WD)

Input

Ignition switch: ON

AWD mode switch: 2WD

4.5 - 5 V

AWD mode switch: AWD-V or AWD

0 V

10 (B)

Ground

Always

0 V

11 (B)

Ground

Always

0 V

12 (Y)

Ground

Battery power supply (AWD solenoid)

Input

Always

11 - 13 V

13 (G)

Ground

AWD mode switch (2WD)

Input

Ignition switch: ON

AWD mode switch: 2WD

0 V

AWD mode switch: AWD-V or AWD

4.5 - 5 V

21 (Y)

Ground

AWD mode switch (AWD)

Input

Ignition switch: ON

AWD mode switch: 2WD or AWD-V

4.5 - 5 V

AWD mode switch: AWD

0 V

23 (R)

Ground

AWD solenoid (left) power supply

Output

Engine speed: At idle

0 V

Engine speed: 3, 000 or more constant

2.5 V⁽¹⁾

24 (V)

Ground

AWD solenoid (left) ground

Input

Always

1.5 V or less

25 (W)

Ground

AWD solenoid (right) power supply

Output

Engine speed: At idle

0 V

Engine speed: 3, 000 or more constant

2.5 V⁽¹⁾

26 (Y)

Ground

AWD solenoid (right) ground

Input

Always

1.5 V or less

⁽¹⁾	The values are changed by throttle opening and engine speed.

CAUTION: When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.