LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Juke SL, FWD, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0441 To P1212 >> DTC P0500: VSS >> Except For M/T Models >> EXCEPT FOR M/T MODELS: Diagnosis Procedure

EXCEPT FOR M/T MODELS: Diagnosis Procedure

  1. CHECK DTC WITH TCM 

    Check DTC with TCM. Refer to "DTC INDEX ".

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Perform trouble shooting relevant to DTC indicated.

  2. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) 

    Check DTC with ABS actuator and electric unit (control unit). Refer to "DTC INDEX ".

    Is the inspection result normal? 

    YES: GO TO 3.

    NO: Perform trouble shooting relevant to DTC indicated.

  3. CHECK DTC WITH COMBINATION METER 

    Check DTC with combination meter. Refer to "DTC INDEX ".

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Perform trouble shooting relevant to DTC indicated.

  4. CHECK OUTPUT SPEED SENSOR 

    Check output speed sensor. Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: GO TO 5.

    NO: Replace or replace error-detected parts.

  5. CHECK WHEEL SENSOR 

    Check wheel sensor. Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    NO: Replace or replace error-detected parts.

scientia non olet · About LEMON Manuals