Diagnosis Procedure

With CONSULT

Check DTC with ABS actuator and electric unit (control unit). Refer to "CONSULT FUNCTION ".

Is the inspection result normal? 

YES: GO TO 2.

NO: Perform diagnosis procedure corresponding to DTC indicated.

With CONSULT

1. Stop the vehicle.
2. Set the parking brake.
3. Use CONSULT to select "RR RH SENSOR" and "RR RH SENSOR" in "DATA MONITOR" mode of "ABS"
4. Check indications of "RR RH SENSOR" and "RR RH SENSOR".
   NOTE: Never cause the vehicle to vibrate.

   Is 0 km/h (0 MPH) indicated for both "RR RH SENSOR" and "RR RH SENSOR"? 

   YES: GO TO 3.

   NO: Perform trouble diagnosis of the rear wheel sensor if 0 km/h (0 MPH) is not displayed. Refer to "DIAGNOSIS PROCEDURE ".

With CONSULT

1. Drive the vehicle at 20 km/h (13 MPH).
   CAUTION: Always drive vehicle at a safe speed.
2. Check indications of "RR RH SENSOR" and "RR RH SENSOR".

   Is the difference between the indicated values of "RR RH SENSOR" and "RR RH SENSOR" within ± 1 km/h (1 MPH)? 

   YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

   NO: Perform trouble diagnosis of the rear wheel sensor. Refer to "DIAGNOSIS PROCEDURE "