LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Juke S, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U0100 To P0128 >> DTC P007B: Charge Air Temperature Sensor >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If DTC Confirmation Procedure is previously conducted, always turn ignition switch OFF and wait at least 30 seconds before conducting the next test.

    : GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Stop the engine and leave the vehicle at least 7 hours.
    2. Turn ignition switch ON and wait at least 5 seconds.
    3. Check the DTC.

      Is the DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals