LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> Juke S, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> DTC/Circuit Diagnosis >> VDC Off Switch >> Component Inspection

Component Inspection

  1. CHECK VDC OFF SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect triple switch harness connector.
    3. Check the continuity between VDC OFF switch connector terminals.
      VDC OFF switch Condition Continuity
      Terminal
      1 - 2 When VDC OFF switch is pressed Existed
      When VDC OFF switch is not pressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace VDC OFF switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals