LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> 370Z Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System >> DTC/Circuit Diagnosis >> DTC C1115: Wheel Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 
    1. Start the engine and drive the vehicle at 30 km/h (19 MPH) or more for approximately 1 minute.
    2. Perform self-diagnosis for "ABS" with CONSULT.

      Is DTC "C1115" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END