LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Sentra S, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Unit Disassembly And Assembly >> Final Drive >> Disassembly

Final Drive: Disassembly

  1. Remove differential side bearing inner race (clutch housing side) (1) with the following procedure.
    1. Set a suitable tool to differential side bearing inner race (clutch housing side).
    2. Remove differential side bearing inner race (clutch housing side) using Tool (A).

      Tool number: ST33061000 (J-8107-2) 

      Fig 1: Removing Differential Side Bearing Inner Race Using Tool (Clutch Housing Side)
      G08989645Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove final gear mounting bolts and remove final gear (1).
    Fig 2: Removing Final Gear Mounting Bolts Using Tool
    G08989646Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove differential side bearing inner race (transaxle case side) (1) with the following procedure.
    1. Set a suitable tool to differential side bearing inner race (transaxle case side).
    2. Remove differential side bearing inner race (transaxle case side) using a suitable tool (A).
      Fig 3: Removing Differential Side Bearing Inner Race Using Tool (Transaxle Case Side)
      G08989647Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals