DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. Press push-button ignition switch under the following conditions to start engine, and wait 5 seconds or more.
  - Selector lever: In the P position
  - Brake pedal: Depressed
2. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.
  Is DTC detected?
  
  YES: Go to "DIAGNOSIS PROCEDURE ".
  
  NO: GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE 2
1. Stop engine.
2. Perform DTC CONFIRMATION PROCEDURE for DTC P1650. Refer to "DTC LOGIC ".
3. Turn ignition switch ON.
4. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.
  Is DTC detected?
  
  YES: Refer to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END