Sleep mode activation

BCM receives the sleep-ready signal (ready) from IPDM E/R, combination meter, automatic back door control module, sliding door control unit LH and sliding door control unit RH via CAN communication.
BCM transmits the sleep wake up signal (sleep) to each unit when all of the CAN sleep conditions are fulfilled.
Each unit stops the transmission of CAN communication with the sleep wake up signal. BCM is in CAN communication sleep mode.
BCM is in the low power consumption mode and perform the low power consumption control when all of the BCM sleep conditions are fulfilled with CAN sleep condition.

SLEEP CONDITION

CAN sleep condition

BCM sleep condition

⁽¹⁾	Refer to "INTERIOR ROOM LAMP BATTERY SAVER SYSTEM: SYSTEM DESCRIPTION " for details of the interior room lamp battery saver time.