Component Function Check

CHECK FUNCTION

Select "TILT SW-UP", "TILT SW-DOWN" in "DATA MONITOR" mode with CONSULT.

Check tilt switch signal under the following conditions.

Monitor item	Condition		Status
TILT SW-UP	Tilt switch (up)	Operate	ON
TILT SW-UP	Tilt switch (up)	Release	OFF
TILT SW-DOWN	Tilt switch (down)	Operate	ON
TILT SW-DOWN	Tilt switch (down)	Release	OFF

Is the inspection result normal?

YES: Inspection End.

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".