Drive Pinion: Disassembly

Remove pinion sleeve mounting bolts.

Fig 1: Locating Pinion Sleeve Mounting Bolts
Courtesy of NISSAN NORTH AMERICA, INC.
Lightly tap adapter case with a plastic hammer to remove pinion sleeve assembly.
Remove the pinion sleeve shim.
Remove the pinion lock nut.

Fig 2: Removing Pinion Sleeve Assembly Using Plastic Hammer
Courtesy of NISSAN NORTH AMERICA, INC.
Remove drive pinion assembly from pinion sleeve with the drift (A) [SST: ST33220000 (J-25804-01)].
Remove companion flange.
Remove the O-ring from pinion sleeve.
CAUTION:
- Never use a tool.
- Never damage the pinion sleeve.
Fig 3: Removing Drive Pinion Assembly From Pinion Sleeve Using Drift
Courtesy of NISSAN NORTH AMERICA, INC.
Put out the circumference of pinion sleeve oil seal from back side of pinion sleeve with punch to remove pinion sleeve oil seal.
CAUTION: When removing oil seal, never damage the pinion sleeve by scooping it out with a tool.
Remove pinion rear bearing inner race.

Fig 4: Removing Pinion Sleeve Oil Seal
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the pinion rear bearing outer race with the puller (A) [SST: KV381054S0 (J-34286)].

Fig 5: Removing Pinion Rear Bearing Outer Race Using Puller
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the pinion front bearing outer race with the puller (A) [SST: KV381054S0 (J-34286)].
Remove the collapsible spacer from the drive pinion.

Fig 6: Removing Pinion Front Bearing Outer Race Using Puller
Courtesy of NISSAN NORTH AMERICA, INC.
Using the replacer (A) (commercial service tool), press the pinion front bearing inner race out of the drive pinion.

Fig 7: Removing Inner Race Of Pinion Bearing (Front) From Drive Pinion Using Replacer
Courtesy of NISSAN NORTH AMERICA, INC.