LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Murano LE, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Except CROSSCABRIOLET) >> DTC/Circuit Diagnosis >> VDC Off Switch >> Component Inspection

Component Inspection

  1. CHECK VDC OFF SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect VDC OFF switch harness connector.
    3. Check the continuity between VDC OFF switch connector terminals.
      VDC OFF switch Condition Condition
      Terminal
      1 - 2 When VDC OFF switch is hold pressed. Existed
      When releasing VDC OFF switch. Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace VDC OFF switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals