Component Inspection

CHECK ACCELERATOR PEDAL POSITION SENSOR

Turn ignition switch OFF.
Reconnect all harness connectors disconnected.
Turn ignition switch ON.

Check the voltage between ECM harness connector terminals as per the following condition.

ECM			Condition		Voltage
Connector	+	-
Connector	Terminal
E18	102	105	Accelerator pedal	Fully released	0.6 - 0.9 V
	102	105		Fully depressed	3.9 - 4.7 V
	119	120		Fully released	0.3 - 0.6 V
	119	120		Fully depressed	1.95 - 2.4 V

Is the inspection result normal?

YES: INSPECTION END

NO: Replace accelerator pedal assembly. Refer to "EXPLODED VIEW ".