LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Juke SL, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing, Periodic Maintenance And Removal And Installation >> Ignition Signal >> Component Inspection (Condenser)

Component Inspection (Condenser)

  1. CHECK CONDENSER 
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
      Condenser Resistance
      + -
      Terminal
      1 2 Above 1 MΩ [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace Condenser.

scientia non olet · About LEMON Manuals