Component Function Check

CHECK SHIFT POSITION INDICATOR
CAUTION: Always drive vehicle at a safe speed.
1. Start engine.
2. Check if correct selector lever position ("P", "N", "R" or "D") is displayed as selector lever is moved into each position.
3. Drive vehicle in the manual mode, and confirm that the actual gear position and the meter's indication of the position mutually coincide when the selector lever is shifted to the "UP (+ side)" or "DOWN (- side)" side [1st ↔ 6th (7th*) gear].
  *: For JUKE NISMO
  
  Is the inspection result normal?
  
  YES: INSPECTION END
  
  NO: Go to "DIAGNOSIS PROCEDURE ".