Detailed Flow

Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using diagnosis worksheet. Refer to "DIAGNOSTIC WORK SHEET ".

: GO TO 2.

Check the following items based on the information obtained from the customer.

• Fail-safe. Refer to "FAIL-SAFE ".
• CVT fluid inspection. Refer to "INSPECTION ".
• Line pressure test. Refer to "INSPECTION AND JUDGMENT ".
• Stall test. Refer to "INSPECTION AND JUDGMENT ".

  : GO TO 3.

1. Check DTC.
2. Perform the following procedure if DTC is detected.
   • Record DTC.
   • Erase DTC. Refer to "DIAGNOSIS DESCRIPTION ".

     Is any DTC detected? 

     YES: GO TO 4.

     NO: GO TO  5.

Perform "Diagnostic Procedure" for the displayed DTC.

: GO TO 5.

Perform "DTC CONFIRMATIOM PROCEDURE" for the displayed DTC.

Is DTC detected? 

YES: GO TO  4.

NO: GO TO 6.

Confirm the symptom described by the customer.

Is any malfunction present? 

YES: GO TO 7.

NO: INSPECTION END 

Perform "RODE TEST". Refer to "DESCRIPTION ".

: GO TO 8.

Confirm the symptom described by the customer.

Is any malfunction present? 

YES: GO TO  2.

NO: INSPECTION END