Selective Unlock Function

• When an LOCK signal is transmitted from keyfob, all doors are locked.
• When an UNLOCK signal is transmitted from keyfob once, driver side door is unlocked.
• Then, if an UNLOCK signal is transmitted from keyfob again, all other doors are unlocked.

How to change selective unlock mode. 

With CONSULT 

Selective unlock mode can be set to ON or OFF using CONSULT.

Refer to "DOOR LOCK: CONSULT FUNCTION (BCM - DOOR LOCK) ".

Without CONSULT 

• ON/OFF can be switched when keyfob lock button and unlock button are pressed simultaneously for 5 seconds or more while steering lock is locked.
• When mode is switched, hazard warning lamp blinks.

  OFF → ON: 3 blinks

  ON → OFF: 1 blink