LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Brake Control System (Abs)) >> DTC/Circuit Diagnosis >> Stop Lamp Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2012 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DATA MONITOR

    On "DATA MONITOR", select "STOP LAMP SW" and check the stop lamp switch signal.

    Condition STOP LAMP SW (DATA MONITOR)
    Brake pedal depressed. On
    Brake pedal released. Off

    Is the inspection result normal? 

    YES: Inspection End.

    NO: Go to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .