LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Security Control System (With Intelligent Key System)) >> Symptom Diagnosis >> Engine Does Not Start When Intelligent Key Is Inside Of Vehicle >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM WORK SUPPORT 

    Perform "INSIDE ANT DIAGNOSIS" on Work Support in "INTELLIGENT KEY".

    Refer to "INTELLIGENT KEY: CONSULT FUNCTION (BCM - INTELLIGENT KEY) ".

    : GO TO 2.

  2. PERFORM SELF-DIAGNOSIS RESULT 

    Perform Self-Diagnosis Result in "BCM", and check whether or not DTC of inside key antenna is detected.

    Is DTC detected? 

    YES: Refer to "DTC LOGIC " (instrument center) or "DTC LOGIC " (luggage room).

    NO: GO TO 3.

  3. CHECK PUSH-BUTTON IGNITION SWITCH 

    Check push-button ignition switch.

    Refer to "COMPONENT FUNCTION CHECK ".

    Is the operation normal? 

    YES: GO TO 4.

    NO: Repair or replace malfunctioning parts.

  4. CONFIRM THE OPERATION 

    Confirm the operation again.

    Is the inspection normal? 

    YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    NO: GO TO  1.

scientia non olet · About LEMON Manuals