LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Security Control System (With Intelligent Key System)) >> DTC/Circuit Diagnosis >> DTC B260F: Engine Status >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 
    1. Turn ignition switch ON.
    2. Check "Self-diagnosis result" using CONSULT.
    3. Touch "ERASE".
    4. Perform DTC Confirmation Procedure.

      See "DTC LOGIC ".

      Is the DTC B260F displayed again? 

      YES: GO TO 2.

      NO: INSPECTION END

  2. REPLACE ECM 

    Replace ECM. Refer to "ECM: SPECIAL REPAIR REQUIREMENT ".

    : INSPECTION END

scientia non olet · About LEMON Manuals