DTC Confirmation Procedure
WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Turn ignition switch ON under the following conditions and wait 1 second or more.
- Selector lever is in the P or N position
- Do not depress brake pedal
- Check "Self-diagnosis result" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: GO TO 2.
- Turn ignition switch ON under the following conditions and wait 1 second or more.
- PERFORM DTC CONFIRMATION PROCEDURE 2
- After step 1 of DTC confirmation procedure, shift selector lever to a position other than P or N
- Check "Self-diagnosis result" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END