LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Security Control System (With Intelligent Key System)) >> DTC/Circuit Diagnosis >> DTC B2556: Push-Button Ignition Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK PUSH-BUTTON IGNITION SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector.
    3. Check continuity between push-button ignition switch terminals.
      Push-button ignition switch Condition Continuity
      Terminal
      4 8 Push-button ignition switch Pressed Existed
      Not pressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals