LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Security Control System (With Intelligent Key System)) >> DTC/Circuit Diagnosis >> DTC B210F: Shift Position/Clutch Interlock Switch >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B210F is displayed with DTC B2603, first perform the trouble diagnosis for DTC B2603. Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210F INTRLCK/PNP SW ON There is a difference between input from transmission range switch and shift position signal from BCM.
  • Harness or connectors (Transmission range switch circuit is open or shorted)
  • Transmission range switch
  • IPDM E/R
  • BCM
scientia non olet · About LEMON Manuals