LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Security Control System (With Intelligent Key System)) >> DTC/Circuit Diagnosis >> DTC B210B: Starter Control Relay >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 
    1. Turn ignition switch ON.
    2. Check "Self-diagnosis result" for IPDM E/R using CONSULT.
    3. Touch "ERASE".
    4. Perform DTC Confirmation Procedure.

      See "DTC LOGIC ".

      Is DTC detected? 

      YES: Replace IPDM E/R. Refer "REMOVAL AND INSTALLATION ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals