LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (Qr25DE) (Sedan) >> Fuel Pump >> Component Inspection

Component Inspection

  1. CHECK FUEL PUMP 
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
    3. Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
      Fuel level sensor unit and fuel pump Resistance
      + -
      Terminal
      6 4 0.2 - 5.0Ω [at 25°C (77°F)]

      Is the inspection result normal? 

      YES >> INSPECTION END

      NO >> Replace "fuel level sensor unit and fuel pump". Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals