LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Xterra PRO-4X, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0605 To P2A03 >> DTC P1211: TCS Control Unit >> DTC Confirmation Procedure

DTC Confirmation Procedure

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle. 

  1. Start engine and let it idle for at least 60 seconds.
  2. Check 1st trip DTC.
  3. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals