Maintenance Service Reminder Reset - Procedure 09
NOTE:
This procedure is for the Vehicle Information Display (inside tachometer, lower right).
Maintenance intervals shown in the Vehicle Information Display are reset using the Drive Computer buttons. See Fig 1.
- With the ignition switch in the ON position, push the ENTER button (1) repeatedly until the SETTING menu is displayed. See Fig 1.
- Use the NEXT button (2) to select MAINTENANCE menu, then confirm with the ENTER (1) button. Select item to adjust or reset:
- OIL > ENGINE OIL
- FILTER
- OIL > T/M OIL (Transmission Fluid)
- TIRE
- Input the maintenance reminder adjustments by doing the following:
- To reset the automatic reminder mileage to zero, go to the RESET menu, then push the NEXT button and confirm with the ENTER button.
- To adjust the mileage until next reminder, on each setting menu, push the NEXT button. Push and hold the button to increase the number every 600 miles (1, 000 km).
- To change to No Reminders, set to "-".
- To return to the initial SETTING menu, press and hold the ENTER button for at least 1 second.