Maintenance Service Reminder Reset - Procedure 02
NOTE:
This procedure is for the Color Control Panel Display. The actual layout of the control panel may appear different for different vehicles, but the key functions are similar.
The Control Panel Display Screen is controlled using the INFO (or TRIP) button to initiate the display screen, and the NISSAN Controller to navigate the menus. Highlight an item on the display using the main directional buttons (ARROWS) or turning the CENTER DIAL. Press the ENTER button to select an item or perform the action. Using the BACK button can either cancel an action, return to the previous screen, or accept changes to some actions.
- Push the INFO button on the control panel, and select the MAINTENANCE menu using the NISSAN controller.NOTE: On some 2010 and older models, there is no INFO button - the button will be marked either TRIP INFO, or just TRIP. Use the button repeatedly to access the maintenance menu, and THEN use the NISSAN controller after that to reset/adjust.
- Select one of the maintenance items to reset.
- Reset reminder or change milage interval:
- Select DISTANCE to reset the automatic reminder to back to 0 mi (km).
- Select INTERVAL (on some older models SCHEDULE) to change the maintenance interval (miles until reminder is displayed). Use the "+" or "-" buttons, or turn the CENTER DIAL to adjust number of miles.
- To accept the changes, press the BACK button. Use the BACK again to return to a previous menu.