LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction (Qr25DE) >> Service Information >> Basic Service Procedure >> Fuel Pressure Check >> Fuel Pressure Release >> Without CONSULT

Without CONSULT

  1. Remove fuel pump fuse (1) located in IPDM E/R (2).
    • ←: Vehicle front
  2. Start engine.
  3. After engine stalls, crank it two or three times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
Fig 1: Identifying IPDM E/R And Fuel Pump Fuse
G04925143Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals