Steering Switch Check (With Bluetooth)

1. Turn ignition switch OFF.
2. Disconnect Bluetooth control unit connector B15 and spiral cable connector M30.
3. Check continuity between Bluetooth control unit connector B15 (A) terminals 12, 13, and 14 and spiral cable connector M30 (B) terminals 25, 31, and 33.

   Terminals				Continuity
   A		B
   Connector	Terminal	Connector	Terminal
   B15	12	M30	33	Yes
   	13		31
   	14		25

4. Check continuity between Bluetooth control unit and ground.

   Terminals			Continuity
   (+)		(-)
   Connector	Terminal
   B15	12	Ground	No
   	13
   	14

   Fig 1: Checking Harness

   Courtesy of NISSAN NORTH AMERICA, INC.

   OK or NG 

   OK: GO TO 2.

   NG: Repair harness.

1. Disconnect audio unit connector M43 (mid system) or AV control unit M92 (premium system).
2. Check continuity between audio unit connector M43 (mid system) or AV control unit M92 (premium system) (A) terminals 6, 15, and 16 and Bluetooth control unit connector B15 (B) terminals 17, 19, and 18.

   Terminals				Continuity
   (A)		(B)
   Connector	Terminal	Connector	Terminal
   M43 (mid system) M92 (premium system)	6	B15	17	Yes
   	15		19
   	16		18

   Fig 2: Checking Harness

   Courtesy of NISSAN NORTH AMERICA, INC.

   OK or NG 

   OK: GO TO 3.

   NG: Repair harness.

1. Disconnect spiral cable connector M78.
2. Check continuity between spiral cable terminals.

   15 - 33: Continuity should exist  .

   17 - 31: Continuity should exist  .

   19 - 25: Continuity should exist  .

   Fig 3: Checking Spiral Cable

   Courtesy of NISSAN NORTH AMERICA, INC.

   OK or NG 

   OK: GO TO 4.

   NG: Replace spiral cable. Refer to , "REMOVAL AND INSTALLATION ".

Check resistance between spiral cable connector M78 terminals.

Fig 4: Checking Steering Switch

Courtesy of NISSAN NORTH AMERICA, INC.

OK or NG 

OK: Inspection End.

NG: Replace steering switch. Refer to , "REMOVAL AND INSTALLATION ".