LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body, Lock & Security System >> Service Information >> NATS (NISSAN Anti-Theft System) >> CONSULT Function >> Consult Diagnostic Test Mode Function

Consult Diagnostic Test Mode Function

CONSULT DIAGNOSTIC TEST MODE Description
C/U INITIALIZATION When replacing any of the following components, C/U initialization and re-registration of all NATS mechanical keys are necessary.
[NATS mechanical key/BCM/ECM(1)]
SELF-DIAG RESULTS Detected items (screen terms) are as shown in the chart below.
Refer to "NATS SELF-DIAGNOSTIC RESULTS ITEM CHART ".
(1) When replace ECM, refer to , "ECM RE-COMMUNICATING FUNCTION ".
NOTE:
  • When any initialization is performed, all ID previously registered will be erased and all NATS mechanical keys must be registered again.
  • The engine cannot be started with an unregistered key. In this case, the system will show "DIFFERENCE OF KEY" or "LOCK MODE" as a self-diagnostic result on the CONSULT screen.
  • In rare case, "CHAIN OF ECM-IMMU" might be stored as a self-diagnostic result during key registration procedure, even if the system is not malfunctioning.
scientia non olet · About LEMON Manuals