Specifications With Consult
WARNING: This page is about a different car, the 2012 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The output signal indicates the EPS control unit calculation date. The normal values will be displayed even in the event that the output circuit (harness) is open.
| Monitor item (Unit) | Content | Condition | Display value | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| BATTERY VOLT (V) | Power supply voltage for EPS control unit | Ignition switch: ON | Battery voltage | |||||||
| TORQUE SENSOR (Nm) | Steering wheel turning force | Engine running | Steering wheel: Not steering (There is no steering force) |
0.00 Nm | ||||||
| Steering wheel: Steering | 0 - 8.19 Nm(1) (The value is changed according to steering left or right) | |||||||||
| MOTOR SIG (A) | Command current to EPS motor | Engine running | Steering wheel: Not steering (There is no steering force) |
0.00 A | ||||||
| Steering wheel: Steering | 0 - 84 A (The value is changed according to steering left or right) | |||||||||
| C/U TEMP (°) | EPS control unit temperature | Ignition switch: ON | Temperature in control unit | |||||||
| ASSIST LEVEL (%) | Assist available level | Engine running | Steering wheel: Normal steering | 100% | ||||||
| Steering wheel: Excessive steering | Gradually-decreased from 100%(3) | |||||||||
| VEHICLE SPEED (km/h) or (mph) | Vehicle speed | Vehicle stopped | 0 km/h (0 mph) | |||||||
| While driving | Approximately equal to the indication on speedometer (Inside of ±10%)(2) | |||||||||
| WARNING LAMP (ON/OFF) | EPS warning lamp condition | EPS warning lamp: ON | ON | |||||||
| EPS warning lamp: OFF | OFF | |||||||||
| ENGINE STATUS (RUN/CRANK/STALL/STOP) | Engine status | Engine stopped | STOP | |||||||
| Engine stalled | STALL | |||||||||
| Engine cranking | CRANK | |||||||||
| Engine running | RUN | |||||||||
|
||||||||||