LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Quest SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P014C To P0453 >> DTC P0196: EOT Sensor >> Component Inspection

Component Inspection

  1. CHECK ENGINE OIL TEMPERATURE SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect engine oil temperature sensor harness connector.
    3. Remove engine oil temperature sensor. Refer to "EXPLODED VIEW ".
    4. Check resistance between engine oil temperature sensor terminals by heating with hot water as shown in the figure below.
      Terminals Condition Resistance
      1 and 2 Temperature [°C (°F)] 20 (68) 2.1 - 2.9 kΩ
      50 (122) 0.68 - 1.00 kΩ
      90 (194) 0.236 - 0.260 kΩ
      Fig 1: Checking Engine Oil Temperature Sensor
      G08171525Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace engine oil temperature sensor. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals