Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "DOOR LOCK" of "BCM" using CONSULT.
Select "KEY CYL LK-SW", "KEY CYL UN-SW" in "DATA MONITOR" mode.

Check that the function operates normally according to the following conditions.

MONITOR ITEM CONDITION CHART

Monitor item	Condition
KEY CYL LK-SW	Lock	: ON
KEY CYL LK-SW	Neutral / Unlock	: OFF
KEY CYL UN-SW	Unlock	: ON
KEY CYL UN-SW	Neutral / Lock	: OFF

Is the inspection result normal?

YES: INSPECTION END

NO: Refer to "DIAGNOSIS PROCEDURE ".