ENTRY ASSIST FUNCTION : System Description: Description

• This function allows the driver seat control unit to return the driver seat from the exiting position to the previous driving position, when ignition switch is operated from OFF to ACC.
• Entry assist function stops when starter signal is ON while entry assist function is being operated. Entry assist function restarts when starter signal is OFF.
• When ignition switch is operated OFF to ACC while operation conditions are satisfied, driver seat control unit receives ACC signal from BCM via CAN communication. Driver seat control unit operates sliding motor when driver seat control unit detects that ignition switch is changed to ACC.
• Driver seat control unit receives sliding sensor position signal from sliding sensor. Driver seat control unit stops the operation of sliding motor when driver seat control unit detects that driver seat is returned to the previous driving position from the exiting position.
  NOTE:

  • This function is set to ON before delivery (initial setting).
  • Further information for the system setting procedure. Refer to "DESCRIPTION ".

Operation Condition

Satisfy all of the following items. The entry assist function is not performed if these items are not satisfied.