Work Procedure

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1
There are two initialization methods.

Which method do you use?

With door switch: Go to 2.

With vehicle speed: Go to 3.
STEP 2-A (WITH DOOR SWITCH)
1. Turn ignition switch from ACC to OFF position.
2. Front door switch (driver side) is ON (open) → OFF (close) → ON (open).
  END
STEP 2-B (WITH VEHICLE SPEED)
Drive the vehicle at more than 25 km/h (16 MPH).

END