How To Set

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Starts on board self-diagnosis STEP 5 mode (Each sensor recognition temperature check; "51" or "52" is indicated on front A/C control display).
Press fan switch (up:) and check that "61" is indicated on front A/C control display.
After approximately 3 seconds, the foot position setting trimmer can be available.

Press MODE switch to select FOOT mode type as shown below.

DISPLAY DESCRIPTION

Type	Display	Defroster door position
Type	Display	Auto control	Manual control
Type-A	-	OPEN	CLOSE
Type-B (Initial setting)	-	OPEN	OPEN
Type-C	-	CLOSE	OPEN
Type-D	-	CLOSE	CLOSE

NOTE: When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the foot position setting trimmer may be cancelled.