Component Inspection (Fuel Pump)

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUEL PUMP

Turn ignition switch OFF.
Disconnect "fuel level sensor unit (fuel pump)" harness connector.

Check resistance between "fuel level sensor unit (fuel pump)" terminals as follows.

TERMINALS RESISTANCE REFERENCE CHART

Terminals	Resistance [at 25°C (77°F)]
2 and 4	0.2 - 5.0 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace fuel level sensor unit, fuel filter and fuel pump assembly. Refer to "EXPLODED VIEW ".