LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Quest LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Power Control System) >> Power Distribution System >> DTC/Circuit Diagnosis >> B2614 Acc Relay Circuit >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ACCESSORY RELAY
    1. Turn ignition switch OFF.
    2. Remove accessory relay.
    3. Check the continuity between accessory relay terminals.
      TERMINAL CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace accessory relay

      Fig 1: Accessory Relay Circuit
      G04889520Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals