LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Quest LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Brake Control System (With VDC)) >> System Description >> System >> Abs Function >> ABS FUNCTION : System Description >> Input Signal And Output Signal

Input Signal And Output Signal

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Major signal transmission between each unit via communication lines is shown in the following table.

INPUT SIGNAL AND OUTPUT SIGNAL REFERENCE CHART

Component Signal description
Yaw rate/side G sensor Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line(1).
  • Yaw rate signal
  • Side G sensor signal
Steering angle sensor Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
  • Steering angle sensor signal
Combination meter Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
  • VDC warning lamp signal
  • ABS warning lamp signal
(1) Communication line between yaw rate/side G sensor and ABS actuator and electric unit (control unit)