LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Quest LE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key System) >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove instrument finisher A. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect NATS antenna amp. connector and push-button ignition switch connector.
  3. Disengage the push-button ignition switch fixing pawls by pushing them in the direction of the arrow (1) as shown in the figure below.
    Fig 1: Pushing Push-Button Ignition Switch Fixing Pawls
    G08172883Courtesy of NISSAN NORTH AMERICA, INC.
  4. Push push-button ignition switch (1) in the direction of the arrow (2), as shown in the figure below, and remove push-button ignition switch from NATS antenna amp (2).
scientia non olet · About LEMON Manuals