Work Procedure

There are three way of setting method.

Which method do you choose? 

With CONSULT>>GO TO 2.

With set switch>>GO TO  3.

1. Select "Work support".
2. Select "EXIT SEAT SLIDE SETTING" then touch display to change between ON and OFF.
   • EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
3. Select "SEAT SLIDE VOLUME SET" and touch either of "40 mm", "80 mm", or "150 mm".
4. Then touch "OK".

: END

1. Turn ignition switch OFF.
2. Push set switch and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.

• Entry/exit assist are ON: Memory switch indicator blink two times.
• Entry/exit assist are OFF: Memory switch indicator blink once.

  : END