Detailed Flow

Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnostic worksheet. Refer to "DIAGNOSTIC WORK SHEET ".

GO TO 2.

Perform self diagnostic result. Refer to "CONSULT FUNCTION (ABS) ".

Are any DTCs displayed? 

YES: Refer to "DTC INDEX ".

NO: GO TO 3.

Check that the symptom is a normal operating condition. Refer to "DESCRIPTION ".

Is the symptom a normal operating condition? 

YES: Inspection End.

NO: GO TO 4.

Check ABS and brake warning lamps, VDC OFF and SLIP indicator lamps operation. Refer to "VDC/TCS/ABS: SYSTEM DESCRIPTION ".

Is ON/OFF timing normal? 

YES: GO TO 5.

NO: Perform warning lamp diagnosis. Refer to "COMPONENT FUNCTION CHECK " (ABS warning lamp), "COMPONENT FUNCTION CHECK " (brake warning lamp), "COMPONENT FUNCTION CHECK " (VDC OFF indicator lamp) or "COMPONENT FUNCTION CHECK " (SLIP indicator lamp).

Perform diagnosis applicable to the symptom. Refer to "SYMPTOM TABLE ".

GO TO 6.

Perform self diagnostic result again, and check that the malfunction is repaired. After checking, erase the self diagnosis memory. Refer to "CONSULT FUNCTION (ABS) ".

Inspection End.