LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Murano LE, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (Except CROSSCABRIOLET) >> DTC/Circuit Diagnosis >> DTC B2604: Shift Position >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B2604 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to BCM: DTC LOGIC .
  • If DTC B2604 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to BCM: DTC LOGIC .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B2604 PNP/CLUTCH SW BCM detects the following status for 500 ms or more when the ignition switch is in the ON position.
  • N position input signal exists. Shift position signal from TCM does not exist.
  • N position input signal does not exist. Shift position signal from TCM exists.
  • Harness or connectors

    (Transmission range switch circuit is open or shorted.)

  • Transmission range switch
scientia non olet · About LEMON Manuals