Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
VDC function, TCS function, ABS function, EBD function, Brake limited slip differential (BLSD) function
| Component |
Signal description |
| Steering angle sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Steering angle sensor signal
|
| Yaw rate/side/decel G sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line
- Yaw rate signal
- Side G sensor signal
- Decel G sensor signal
|
| ECM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Accelerator pedal position signal
- Engine speed signal
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
- Target throttle position signal
|
| TCM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- N range signal
- P range signal
- R range signal
- Current gear position signal
|
| AWD control module |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
|
| Combination meter |
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
- Brake fluid level switch signal
- ABS warning lamp signal
- Brake warning lamp signal
- VDC warning lamp signal
- VDC OFF indicator lamp signal
|