Inspection After Disassembly

Case

Check the contact surfaces of the shift rod and bearing for wear and damage. If any is found, replace with a new one.

Fig 1: Identifying Inspection Areas

Courtesy of NISSAN NORTH AMERICA, INC.

Sleeve

Check the items below. If necessary, replace them with new ones.

• Damage and excessive wear of the contact surfaces of the sprocket, mainshaft and sleeve.
• Sleeve must move smoothly.

Fig 2: Checking Sleeve

Courtesy of NISSAN NORTH AMERICA, INC.

Gear, Shaft and Drive Chain

Check the items below. If necessary, replace them with new ones.

• Damage, peeling, uneven wear and bending of the shaft.
• Excessive wear, damage and peeling of the gear.

Fig 3: Identifying Inspection Points

Courtesy of NISSAN NORTH AMERICA, INC.

Bearing

Check the bearing for damage and rough rotation. If necessary, replace it with a new one.

Fig 4: Checking Bearing

Courtesy of NISSAN NORTH AMERICA, INC.